About Elite Detailing
PAINT
GEL COAT
GEL COAT
- Do not wash vehicle for at least 7 days.
- Coating cure time is 72 hours
- Always use a pH-neutral soap with no added waxes, sealants, or other additives, as these can compromise the performance of the ceramic coating. We recommend Shift by Shine Supply
- If you don’t have deionized water at home, be aware that hard water (water with high mineral
- Do not wash vehicle for at least 7 days.
- Coating cure time is 72 hours
- Always use a pH-neutral soap with no added waxes, sealants, or other additives, as these can compromise the performance of the ceramic coating. We recommend Shift by Shine Supply
- If you don’t have deionized water at home, be aware that hard water (water with high mineral content) can cause etching on the coating.
- You must DRY the vehicle after every wash.
- Do NOT leave water, bird droppings & bugs sitting on the surface.
- It is recommended that you wash the vehicle weekly or biweekly using flat out wash mitts by Shine Supply
- After you properly wash vehicle it is crucial that you finish with a final wipe using Punch It by Shine Supply. This will maintain and boost coating.
We understand that you may have preferences regarding aftercare products. However, please note that we cannot guarantee the results or effectiveness of our work if products other than those we recommend are used.
If you plan on having us maintain it please disregard these aftercare instructions.
GEL COAT
GEL COAT
GEL COAT
- Coating cure time is 72 hours
- Always use a pH-neutral soap with no added waxes, sealants, or other additives, as these can compromise the performance of the ceramic coating. We recommend Shift by Shine Supply
- If you don’t have deionized water at home, be aware that hard water (water with high mineral content) can cause etching on the coatin
- Coating cure time is 72 hours
- Always use a pH-neutral soap with no added waxes, sealants, or other additives, as these can compromise the performance of the ceramic coating. We recommend Shift by Shine Supply
- If you don’t have deionized water at home, be aware that hard water (water with high mineral content) can cause etching on the coating.
- You must DRY the boat after every use.
- Always use Aftermath by Shine Supply to wipe down your boat.
- DO NOT USE HOT SAUCE as it contains acetic acid, which is the primary ingredient in vinegar and may interfere with the desired outcome and strip any protection existing on the gel coat.
- Do NOT leave water, bird droppings & bugs sitting on the surface.
- It is recommended that you wash your boat after every use or at the end of a boating weekend.
- After you properly wash your boat it is crucial that you finish with a final wipe using Punch It by Shine Supply. This will maintain and boost coating.
We understand that you may have preferences regarding aftercare products. However, please note that we cannot guarantee the results or effectiveness of our work if products other than those we recommend are used.
If you plan on having us maintain it please disregard these aftercare instructions.